RESPONSIBILITY AND DUTIES:

1. monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
   
2. Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
   
3. Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
   
4. Support Construction Site Manager in monitoring and appraising the contractor’s performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
   
5. Verify physical progress
   
6. Monitor mechanical acceptance and start-up activities between operating unit and contractor
   
7. Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
   
8. Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
   
9. Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
   
10. Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
    
11. Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
    
12. Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications. 
    
13. Witness installation of E&I control panels (both local and inside the control rooms)
    
14. Monitor and witness continuity and meggering inspection works for cables
    
15. Monitor cable laying works in trenches, through ducts and on cable trays
    
16. Monitor loop checks and review records for the same in accordance with technical requirements
    
17. Monitor construction and installation and testing of instrument tubing works
    
18. Review Contractor’s field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
    
19. Assist and co-ordinate with other disciplines on electrical motors installation and alignments
    
20. Interface, participate or co-ordinate in E&I pre-commissioning activities as required
    
21. Preparation of punch lists
    
22. Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place.  Implement project Construction Surveillance Program.
    

Required KNOWLEDGE, qualifications, skills, and EXPERIENCES:

1. Minimum ten (10) year’s experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
   
2. Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
   
3. Exposure to DCS instrumentation works and commissioning of the same
   
4. Thorough knowledge on International standards on E&I like IEC etc.
   
5. Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
   
6. Well versed in safe work practices
   
7. Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
   

Placement : Cepu Site